Comunicați cu furnizorul? Furnizor
Megan Ms. Megan
Cu ce ​​vă pot ajuta?
Contactați furnizorul

JingHongYi PCB (HK) Co., Limited

Pagina principală > Produse > Aluminum PCB

Aluminum PCB

Categorii de produse de Aluminum PCB , suntem producatori specializati din China, Aluminum PCB , Aluminum PCB Led furnizori / fabrica, en-gros produse de înaltă calitate de Aluminum Core PCB R & D și de fabricație, avem perfect servicii post-vânzare și suport tehnic. Așteaptă cu nerăbdare cooperarea!

Toate produsele

  • Placă de aluminiu PCB pentru lumină de tub LED

    Placă de aluminiu PCB pentru lumină de tub LED

    • Marca: JHY PCB

    • ambalare: Pachetul cu vaccin

    Suntem lider producător și exportator de aluminiu personalizate PCB bord pentru Tube cu LED - uri de lumină, tub cu LED - uri PCB, LED - uri PCB tub de lumină, lampă cu LED Tube PCB, etc. Mai mult, acestea sunt durabile, de înaltă performante în natură și pot

  • Fabricarea plăcilor din aluminiu PCB

    Fabricarea plăcilor din aluminiu PCB

    • Marca: JHY PCB

    • ambalare: Pachetul cu vaccin

    JHYPCB este un producător experimentat din aluminiu JHY PCB produce mai mult de un deceniu placă de aluminiu PCB (numită și PCB-uri metalice de bază). Deși inițial preconizate pentru utilizare în industria de alimentare cu energie electrică, aceste substraturi sunt acum utilizate pe scară largă în produsele cu LED-uri...

  • PCB din aluminiu cu două fețe

    PCB din aluminiu cu două fețe

    • Marca: JHY PCB

    • ambalare: Pachetul cu vaccin

    Ce este PCB din aluminiu? PCB din aluminiu se mai numește MCPCB, Metal Core PCB, Aluminiu Core PCB, Aluminum Backed PCB, Aluminum Clad PCB, Placă de aluminiu PCB Clad PCB, Aluminum Plate PCB și IMS PCB, indiferent de numele pe care îl preferați, toate sunt plăci care folosesc aluminiu ca bază material ca porțiune de...

  • PCB din aluminiu metalic

    PCB din aluminiu metalic

    • Marca: JHY PCB

    • ambalare: Pachetul cu vaccin

    Înțelegerea definiției PCB-urilor din aluminiu metalic Metal Core PCB înseamnă că materialul principal (de bază) pentru PCB este metalul, nu FR4 / CEM1-3 normal, etc., iar în prezent, cel mai obișnuit metal folosit pentru producătorul MCPCB sunt aluminiu, cupru și aliaj de oțel. Aluminiul are o bună capacitate de...

  • PCB din aluminiu Flex

    PCB din aluminiu Flex

    • Marca: JHY PCB

    • ambalare: Pachetul cu vaccin

    Producătorul principal al PCB-ului din aluminiu, PCB-ul de bază din aluminiu, placa de circuit imprimat din aluminiu, PCB-ul acoperit cu aluminiu, PCB-ul cu aluminiu, plăcile de circuite metalice acoperite cu aluminiu și PCB-ul din aluminiu de la pcbjhy.com. În timp ce cuprul este cel mai utilizat metal în circuite...

  • Prototip de turnare rapidă PCB din aluminiu

    Prototip de turnare rapidă PCB din aluminiu

    • Marca: JHY PCB

    • ambalare: Pachetul cu vaccin

    Fabricare de prototipuri PCB din aluminiu Producător din China Găsiți un producător și furnizor de prototipuri PCB AIuminum? Alegeți producători, furnizori, exportatori de calitate AIuminum PCB de calitate la WWW.PCBJHY.com. JHYPCB oferă mai mult de zece ani servicii de fabricație a PCB-urilor din aluminiu. Plăcile...

  • PCB LED de bază din aluminiu

    PCB LED de bază din aluminiu

    • Marca: JHY PCB

    • ambalare: Pachetul cu vaccin

    Bază de aluminiu LED PCB producător China Oferim tot felul de produse PCB de bază din aluminiu . Pentru LED-uri de înaltă putere a PCB-ului de bază din aluminiu, PCB cu bază de cupru, PCB cu bază ceramică, pentru LED-uri cu putere redusă a PCB-ului FR4, PCB cu temperatură ridicată. Fiind PCB de bază din aluminiu cu...

  • Placă PCB din aluminiu

    Placă PCB din aluminiu

    • Marca: JHY PCB

    • ambalare: Pachetul cu vaccin

    Suntem angajați cu succes în fabricarea unei game largi de PCB din aluminiu placat , PCB flexibil din aluminiu , placă de circuite tipărită din aluminiu acoperită din China. Caracteristici Dimensiune compactă Finisaj perfect Rezistent la temperatură. PCB de bază din aluminiu pentru pcb din aluminiu cu LED cu...

  • PCB din aluminiu pentru lumină / lampă / tub LED

    PCB din aluminiu pentru lumină / lampă / tub LED

    • Marca: JHY PCB

    • ambalare: Pachetul cu vaccin

    Suntem lider în producătorul și exportatorul de PCB de aluminiu personalizate pentru lumină / lampă / tub LED. Mai mult, acestea sunt durabile, cu performanțe înalte și pot fi personalizate pentru a răspunde cerințelor specifice ale clienților noștri la prețuri rezonabile. Pentru a răspunde nevoilor variate ale...

  • Servicii de fabricare a PCB-urilor din aluminiu

    Servicii de fabricare a PCB-urilor din aluminiu

    • Marca: JHY PCB

    • ambalare: Pachetul cu vaccin

    Producătorul principal de PCB de aluminiu, PCB de bază din aluminiu, placă de circuit imprimat din aluminiu, PCB placat cu aluminiu, PCB cu aluminiu, plăci de circuite acoperite din aluminiu și PCB de aluminiu de la pcbjhy.com. Benifite din aluminiu substrat PCB 1. Durabilitate mai mare: Aluminiul oferă rezistență și...

  • PCB din aluminiu pentru lumină LED

    PCB din aluminiu pentru lumină LED

    • Marca: JHY PCB

    • ambalare: Pachetul cu vaccin

    Avantajele PCB din aluminiu 1. Ecologic: Aluminiul este non-toxic și reciclabil. Fabricarea cu aluminiu este de asemenea favorabilă conservării energiei datorită ușurinței sale de asamblare. Pentru furnizorii de plăci de circuite imprimate, utilizarea acestui metal ajută la menținerea sănătății planetei noastre. 2....

  • PCB din aluminiu pentru LED

    PCB din aluminiu pentru LED

    • Marca: JHY PCB

    • ambalare: Pachetul cu vaccin

    Atât de multă putere și lumină de la un astfel de mic PCB din aluminiu de 3.0W pentru LED. Acest PCB cu suport alb din aluminiu „cald” de 3 W este sigur că va arunca multă lumină asupra oricărui proiect pe care îl adăugați. Aceste LED-uri acționează ca oricare alt LED, cu excepția acestor micuți necesită mult mai...

  • Bec din aluminiu LED PCB

    Bec din aluminiu LED PCB

    • Marca: JHY PCB

    • ambalare: Pachetul cu vaccin

    Utilizarea becului cu aluminiu LED PCB / Alum PCB Automobile: Regulator electronic, aprindere, regulator de alimentare etc. Calculator: placă procesor, unitate de dischete, dispozitive de alimentare etc. Module de putere: invertor, relee de stare solidă, punți redresoare. Lămpi și iluminare: În calitate de promovare...

  • Aluminiu Core PCB LED PCB

    Aluminiu Core PCB LED PCB

    • Marca: JHY PCB

    • ambalare: Pachetul cu vaccin

    Caracteristica PCB din aluminiu Dintre toate PCB-urile metalice, PCB-ul de aluminiu este cel mai frecvent tip - materialul de bază este format din miez de aluminiu cu FR4 standard. Prezintă un strat acoperit termic care disipează căldura într-o manieră extrem de eficientă, în timp ce răcește componentele și crește...

  • Aluminiu PCB 2.0W Alb 1 strat

    Aluminiu PCB 2.0W Alb 1 strat

    • Marca: JHY PCB

    • ambalare: Pachetul cu vaccin

    PCB-ul din aluminiu este utilizat pe scară largă în iluminarea cu LED cu o conductivitate termică bună. Oferim un material excelent, cu conductivități termice ridicate, pentru a asigura o viață stabilă și lungă pentru proiectul condus de produs și furnizor de energie. PCB din aluminiu Caracteristici: IPC 6013 tipuri...

  • Aluminiu de bază cu LED-uri PCB

    Aluminiu de bază cu LED-uri PCB

    • Marca: JHY PCB

    • ambalare: Vacuum Pachet

    Compania noastra este specializata in furnizarea unei gama excelenta de baza din aluminiu cu LED-uri PCB , Flexible PCB din aluminiu , 4 straturi PCB din aluminiu din China producător. Printre toate PCB-urile de bază din metal, PCB-urile din aluminiu sunt cele mai comune - materialul de bază este alcătuit din miez de...

China Aluminum PCB Furnizori

Aluminum Printed Circuit Board, Recognized Best Solutions for High Power and High Thermal Conductivity


As a Chinese PCB manufacturer, Jinghongyi PCB has rich experience in manufacturing aluminium PCB board. It provides customers with high-quality aluminium PCB manufacturing and one-stop aluminium PCB turnkey assembly services, prompt delivery on time, and competitive prices.

Among all metal core PCBs, aluminum core PCB is the most common type, also known as IMS (Isolated Metal Substrate). Due to its low cost, non-toxic and environmental protection, higher durability and lightweight characteristics, aluminum clad PCB is widely used, and its main task is to dissipate the heat generated by power components. For example, it is used in high-power LED lighting power supply, power module, automobile power controller, computer CPU motherboard, etc.

According to the different design structure and application scenarios of aluminium PCB, there are mainly Flexible aluminium PCB, mixed aluminium PCB, multi-layer aluminium PCB, through-hole aluminium PCB and so on.



More detailed introduction of aluminium PCB


and increased energy use. Using heat-sinks increases the costs and makes assembly more difficult, and the extra weight and volume can cause problems.Safe and effective heat dissipation is very important in applications where high power components generate a lot of heat. Although forced cooling is a method, the disadvantage of forced cooling is that it produces disturbing noise, vibration and increased energy consumption while refrigerating. The use of additional radiators increases costs and makes assembly more difficult, and additional weight and volume can cause other unnecessary problems.



ALUMINUM PCB | PCB MANUFACTURING


Using a specific PCB structure is usually a better solution. The commonly used solution is the metal core structure. With this solution, the printed circuit board is composed of aluminum plates bearing track patterns. Thermoelectric insulators are used between the track and the board so that heat can pass through the metal core structure, such as the metal core PCB.

While LED lighting is widely used, it is also necessary to eliminate the heat generated by LED lighting. Therefore, the development of LED lighting industry directly leads to the increase of PCB using aluminium core. At the same time, the market demand of LED PCB board is also growing.

Copper may be used as an alternative. 

For high-power LED, most customers use aluminum-based PCB; for low-power LED, standard FR4 PCB is also available. Our PCB manufacturing specifications and construction of most types of metal-based printed circuit boards.

Aluminum Based PCBs are a unique metal-based copper clad laminate. These types of Printed Circuit Boards have good thermal conductivity, electrical insulation and very solid machining performance. 

They are also known as Aluminum Clad, Aluminum base, MCPCB (Metal Clad Printed Circuit Board), IMS (Insulated Metal Substrate), Thermally Conductive PCBs etc. Aluminum PCBs were developed in the 1970s, soon after which they`re applications increased dramatically. The first application was their use in Amplification Hybrid Integrated Circuits. Now they are being used at a large scale due to which it is necessary for us to have an idea of Aluminum PCBs and their importance.


ALUMINIUM PCB STRUCTURE:



ALUMINIUM PCB STRUCTURE | JHYPCB

AluminumPCBs are actually quite similar to FR4 PCBs. The basic structure of Aluminum PCBs is four layered. It consists of a layer of copper foil, a dielectric layer, an aluminum base layer and aluminum base membrane.


ALUMINIUM PCB LAYERS | JHYPCB


  • Copper Foil Layer: the copper layer used is relatively thicker than normal CCLs ( 1oz-10oz). A thicker layer of copper means a larger current carrying capacity.

  • Dielectric Layer: the Dielectric layer is a thermally conductive layer and is around 50μm to 200μm thick. It had a low thermal resistance and it suitable for its application.

  • Aluminum Base: The third layer isthe aluminum base which is made up of aluminum substrate. It has a high thermal conductivity.

  • Aluminum Base Membrane Layer: Aluminum base membrane is selective. It has a protective role by keeping the aluminum surface safe from scraping and unwanted etching. It is of two types i.e. Lower than 120 degree or around 250 degrees (anti high temperature)


ALUMINUIM PCB ADVANTAGES


ALUMINUIM PCB ADVANTAGES | JHYPCB


  • Lower manufacturing and use costs: Aluminum is a metal that can be found in a variety of climates, so it is easy to mine and refine. Therefore, the costs of doing so are significantly lower than other metals. In turn, this means that manufacturing products with these metals are less expensive as well.Aluminum is a very common metal raw material, its mining and production are very convenient. Therefore, the cost of doing so is significantly lower than that of other metals. Conversely, this means that products made from these metals are also cheaper.

  • More energy-saving and environmentally friendly: Aluminum is non-toxic and recyclable. Because it is easy to assemble, the use of aluminium also helps to save energy. For PCB vendors, the use of this metal helps to maintain the health of our planet.

  • Better heat dissipation performance:Efficient heat dissipation is the greatest advantage of aluminium PCB. High temperature can cause serious damage to electronic equipment, so it is wise to use materials that can help heat dissipation. Aluminum can actually transfer heat from important components to minimize its harmful effects on circuit boards.

  • Higher strength and durability: Aluminum provides strength and durability to a product that ceramic or fiberglass bases cannot. Aluminum is a sturdy base material that can reduce accidental breakage during manufacturing, handling, and everyday use.

  • Lighter weight and better elasticity: Aluminum is widely recognized as a light metal. While increasing the heat dissipation performance of high power components, it also reduces the weight of the product itself, and increases the strength and elasticity. In addition, in the transportation of products, lighter weight also saves the transportation cost of products.

  • Higher conductivity: Thermal conductance of dielectic used is 5 to 10 times higher than old epoxy glass.

  • More effective and reliable: Thermal transfer is more efficient and reliable than regular PCB.


ALUMINUM PCB APPLICATIONS


ALUMINUM PCB APPLICATIONS | JHYPCB


  • Audio device: Input, output amplifier, balanced amplifier, audio amplifier, pre-amplifier,power amplifier.

  • Power Supply: Switching regulator, DC / AC converter, SW regulator, etc.

  • Communication electronic equipment: High-frequency amplifier, filtering appliances,transmitter circuit

  • Office automation equipment: Motor drive, etc.

  • Automobile: Electronic regulator, ignition, power supply controller, etc.

  • Computer: CPU board, floppy disk drive, power supply devices, etc.

  • Power Modules: Inverter, solid state relays, rectifier bridges.

  • Lamps and lighting: As the advocated promotion of energy-saving lamps, a variety of colorful energy-saving LED lights are well received by the market, and aluminum pcb used in LED lights also begin large-scale applications.


TYPES OF ALUMINUM PCB

TYPES OF ALUMINUM PCB | JHYPCB


There are number of types of aluminum PCBs which are used in many applications based on their construction and design. However, main purpose of all the aluminum PCBs is almost same; providing heat dissipation solutions for the applications involving high temperature. Following are the main types of aluminum PCBs.According to the different structure and design of aluminium PCB, different types of aluminium substrates are used in different application scenarios. However, the main uses of all aluminium PCBs are almost the same; heat dissipation solutions are provided for applications involving high temperatures. The following are the main types of aluminium PCB.

  • Flexible Aluminum PCB


Firstly, Flexible aluminium PCB is a new flexible dielectric developed in the development of aluminium products. It is also a kind of flexible circuit board. Because of the combination of polyimide resin and ceramic filter, it has high flexibility, thermal efficiency and excellent electrical insulation. When used in aluminium PCB products, the expensive cables and connectors no longer need to be used.

Flexible circuit boards have unparalleled flexibility, so flexible aluminum PCB can be arbitrarily folded, twisted or formed in any other desired form. However, it should be noted that once a specific shape is formed, it can no longer be changed like other conventional flexible circuit boards. Or deform.


  • Hybrid Aluminum PCB


In hybrid aluminum construction, non-thermal material is processed and refined separately before it is applied to the thermal materials with aluminum base.

The most common practice is developing 2 layer or 4 layer structure which comprises of FR4 material.

A non thermal material that is bonded with thermal material and aluminum base provides rigidity and helps in the dissipation of heat.

This non thermal bonding is preferred over using all thermal materials because it features less cost and encompasses efficient thermal conductance over regular FR4 products.

No heat sinks or assembly steps are required for the development of this product.

Through hole components can be easily adjusted using component windows on the aluminum base.

This helps in passing the cables and connectors through substrate. Also the seal created by solder fillet eliminates the need of costly adopters.

  • Multilayer Aluminum PCB


Multilayer Aluminum PCBs are very common in power supply products and come with multiple layers of thermally conductive dielectrics.

These materials are very useful when they are combined with one or more layer of circuitry in which thermally conductive dielectric is buried between the layers with the help of blind vias which also act as a signal or thermal vias.

Single layer construction of these designs is not very effective, however, when they come with more complex designs they provide an ideal solution for many applications involving heat dissipation.

  • Through Hole Aluminum PCB


When it comes to most complex constructions, a single layer of aluminum is back-filled and pre-drilled with before applying lamination, forming a Core of a multilayer constructions.

Thermal bonding materials are then used to laminate the thermal materials on both sides of the aluminum.

Once lamination is done, drilling is applied on the assembly.

In order to maintain proper electrical insulation, the plated through holes created as the result of drilling must pass through aluminum clearances.


ALUMINUM PCB PERFORMANCE


ALUMINUM PCB PERFORMANCE | JHYPCB


  • Better heat dissipation and conductivity: Compared with ordinary FR4 PCB, aluminium PCB has excellent heat dissipation performance. For example, Fr4 PCB with a thickness of 1.5mm will have a thermal resistance of 20-22 degrees per watt, while aluminium PCB with a thickness of 1.5mm will have a thermal resistance of 1-2 degrees per watt.

  • There is no serious problem of thermal expansion or contraction.: each substance has its own coefficient of thermal expansion. The CTE of aluminum (22ppm/C) and copper(18ppm/C)is quite close. Since aluminum PCBs work well in terms of Thermal dissipation they do not have severe expansion or contraction issues. They work excellently and are durable and reliable.

  • Dimensional Stability: aluminum PCBs show dimensional stability and stable size. For example, when they are heated from 30-140 degrees, their size only had a change by 2.5%-3.0%.

  • Others: Aluminum PCBs can be used in power device surface mount technology. They are effective for use in circuit design because of their performance in terms of thermal expansion of circuit design. They help to prolong products shelf life and product power density. They are also extremely reliable. They can help to shrink the overall volume of the product and is also a cheaper option. They show electromagnetic shielding and high dielectric strength.




CLASSIFICATION OF ALUMINUM PCB

 

CLASSIFICATION OF ALUMINUM PCB | JHYPCB


Aluminum PCBs are essentially divided into three categories.

  • Universal Aluminum PCB: the dielectric layer used here is made up of epoxy glass fiber pre-preg.

  • High Thermal-Conductive Aluminum PCB: the dielectric layer is made up of epoxy resin. The resin used must have high thermal conductivity.

  • High-frequency Aluminum PCB: the dielectric layer is composed of polyolefin or polyimide resin glass fiber pre-preg.


MANUFACTURING DIFFICULTIES OF ALUMINUM PCB


The manufacturing process for nearly all aluminum PCBs is essentially the same. Here we will discuss the major manufacturing processes, the difficulties and their solutions.

  • Copper Etching: the copper foil used in Aluminum PCBs is comparatively thicker. If the copper foil is over 3oz however, the etching requires width compensation. If it is not according to the demand of the design, the trace width will be out of tolerance after etching. Therefore the trace width compensation should be designed accurately. The etching factors need to be controlled during manufacturing process.

Copper Etching | JHYPCB

  • Solder Mask Printing: due to the thick copper foil there is a difficulty in solder mask printing of aluminum PCB. This is because if the trace copper is too thick then the image etched will have a large difference between trace surface and base board and solder mask printing will be difficult. Therefore, the two-time solder mask printing is used. The solder mask oil used should be of good quality and in some cases the resin filling is done first and then solder mask.

  • Mechanical Manufacturing: the mechanical manufacturing process involves mechanical drilling, molding and v-scoring etc. which Is left on internal via. This tends to reduce electrical strength. Therefore, the electric milling and professional milling cutter should be utilized for low-volume manufacturing of products. The drilling parameters should be adjusted to prevent burr from generating. This will help your mechanical manufacturing.

Key Requirements When Selecting an Aluminum PCB Manufacturer


For the most part, all PCB manufacturing follows the same production process regardless of where they are made. The only true differences in suppliers is the level of automation in their process, the newest technology and equipment, and having specific equipment designed to focus on certain types of end products.

For aluminum PCBs, there are several key items that a PCB manufacturer needs to consider if they are going to be able to effectively produce aluminum PCBs in any quantity, including:

  • Dedicated Imaging Equipment

Many of our aluminum backed PCBs go into LED applications that are much longer than the standard 18" x 24" or 20" x 24" production panels used in traditional PCB manufacturing. To be able to accurately register and economically produce these parts, a manufacturer must have either a custom piece of 60" wide UV light imaging equipment or a setup capable of screen printing (at one time) an image and then UV curing through an oven.

The old manufacturing process of screen printing half the image and then trying to hand register the first image while screen print the second half is much less effective.

  • Specialized Scoring Equipment

The more common equipment that can V score through traditional FR-4 materials is not suited to manage aluminum PCBs. To get the lowest cost possible, we need to get the best yield possible, which means we need to be able to place these parts as close as possible to each other on the production panel. Without V scoring, you must mechanically rout the parts out, which could result in up to 20% loss of your yield, subsequently increasing cost.

Our engineering team has many years of experience helping our customers design arrays that are the most cost effective for them to depanelize.

  • Greater Than 40-ton Punch Presses

For aluminum PCBs that are round or have unique features – (slots, large holes, cutouts, etc.) – you will want a manufacturer that can punch out these features. Trying to mechanically rout aluminum PCBs is a very costly way to get these features done in a production environment.

  • In-Line Hi-Pot Test

A unique requirement of aluminum PCB is that customers want to know that the product they are getting has passed a hi-pot test. While most PCB manufacturers can do this, it is usually a separate process in a lab that is not located in electrical testing. Epec`s electrical test set up includes a hi-pot test, which dramatically reduces cost for the customer.

The following table presents some of our Aluminum Core materials:


some of our Aluminum Core materials


Check our Aluminum core PCB manufacturing capabilities in the following table:


Aluminum core PCB manufacturing capabilities




DESIGN GUIDELINES FOR ALUMINUM PCB


DESIGN GUIDELINES FOR ALUMINUM PCB | JHYPCB


The task of aluminum core circuit board is to dissipate the heat generated by power components. Therefore, we recommend installing pure power components in this part of the circuit. The control unit shall be installed on a separate standard PCB.


The most important criterion for this is the minimum drilling distance required for such PCBs.

Drilling distances and diameters


In case of double-sided aluminium-core circuits, the aluminium core must be insulated against throughplating. This is done using an excess of resin when press-moulding the aluminium core with prepregs and copper or by plugging. To this end, the aluminium core must be pre-drilled.

The smallest drilling diameter in the aluminium core is 1,0 mm, the smallest final diameter in the PCB is 0,3 mm. So that the drills are not damaged in these close-set drill holes, a minimum spacing of 1,2 mm is required. This is generally the knock-out criteria for a densely-packed control unit.


Variants of aluminium core circuits


  • Single-sided PCBs on aluminium carriers


A copper foil is laminated onto an aluminium carrier using a prepreg. 
Normally, this variant only has drill holes for fastenings.

  • Multilayer PCBs with aluminium core


Copper foils are laminated onto both sides of an aluminium core using prepreg. The PCB can be through-plated. This means that it is also possible to produce multilayers with a 0,5 mm aluminium core.

  • PCBs on metal heat-conducting sheets


Completed PCBs are press-moulded to an aluminium carrier using a prepreg. Benefit: Multilayers can also be used (only single-sided SMD). Partial aluminium carriers are possible. Disadvantage: Poor heat dissipation, as the heat has to be dissipated through the entire PCB.

  • Aluminium-flex


One further possibility is a rigid-flex PCB structure, where the aluminium carrier works as the rigid area of the PCB. This means that it is also possible, for example, to connect a control unit as a plug connector over the exposed flex area.


BASICS OF HEAT TRANSFER


At a basic level, a discussion about heat transfer includes two topics: temperature and heat flow. Temperature represents the level of thermal energy that`s available, while heat flow represents thermal energy movement from one place to another.

Microscopically, thermal energy is directly related to a molecule`s kinetic energy. The greater the temperature of a material, the greater the thermal agitation of its molecules. It`s normal for areas that contain a lot of kinetic energy to pass it along to areas with less kinetic energy.

There are some material properties that effectively modulate heat that`s transferred between two areas at different temperatures. These include thermal conductivities, material densities, fluid velocities and fluid viscosities. Together, these properties make resolving many heat transfer problems pretty complicated.


THE MECHANISMS OF HEAT TRANSFER


Heat transfer mechanisms can be grouped into three broad categories:

  • Conduction. Areas that have more molecular kinetic energy will send their thermal energy to areas that have less molecular energy. This occurs through a direct collision of molecules, known as conduction. In metals, some of the energy transported from one area to another is also carried by conduction-band electrons.

  • Convection. When heat is generated in an electronic device, it`s transported via conduction to an are where it is then transferred to a fluid. That process is convection, and the fluid can take the form of a gas such as air or conventional water.

  • Radiation. All materials give off thermal energy in amounts that are determined by temperature. When the temperatures are uniform, the radiation flux is in in equilibrium between objects, and there is no exchange of thermal energy. This balance changes when temperatures vary and thermal energy is transported from areas of higher temperatures to those of lower temperature.


HELP RESOURCES


Quick Turn Aluminum PCB
Aluminium PCB Board for LED
Aluminium Base Metal Core PCB
Aluminum PCBs vs. Standard PCBs
Using aluminium in flexible Circuits Board
Things You Need To Know About Aluminum PCBs

Related Products List